Example Sysex Files for FCB1010

Included below are references to example SysEx files for the FCB1010. These are examples and can be a starting point for users.

File Name	Description	Firmware Target	Submitted By:
Beh Firmware Blank Sysex.syx	This is a simple file for Behringer firmware chips. It basically has everything turned off and can be used as a starting point in building a sysex file for MIDI gear for a FCB1010 with Behringer firmware.	Behringer	Ed Dixon
Uno Firmware Blank SysEx.syx	This is a simple file for UnO firmware chips. It basically has everything turned off and can be used as a starting point in building a sysex file for MIDI gear for a FCB1010 with UnO firmware.	UnO	Ed Dixon
Uno Firmware StompBox Mode Blank SysEx.syx	This is a simple file for UnO firmware chips. It basically has everything turned off and can be used as a starting point in building a Stomp Box mode sysex file for MIDI gear for a FCB1010 with UnO firmware.	UnO	Ed Dixon
UnO Firmware PodXtSetup.syx	This is a example file for UnO firmware chips that has been preset for use with a Line 6 POD XT guitar effects unit.	UnO	Mike Riley
UnO Firmware V-Amp Pro G-Major Roland U-220 Marshall JMP-1.syx	This is a example file for UnO firmware chips that has been preset for use with a collection of MIDI gear that includes: V-Amp Pro on MIDI channel 5 Behringer DEQ2496 on MIDI channel 15 Marshall JMP-1 on MIDI channel 11 TC Electronics G-Major on MIDI channel 8 Roland U-220 and GR-50 synths on MIDI channel 1 Left expression pedal is volume for guitar. Right pedal is synth volume. Bank 9 and 0 have guitar presets. Bank 1 has synth presets.	UnO	Ed Dixon
Uno Line 6 POD XTL.syx	Example for controlling a Line 6 POD XT Live using stomp box mode. Banks 0 and 1 are setup for first two banks in XTL. Stomp box 6-9 perform same functions as upper row on the XTL. Stomp box 10 is set up for Wah on/off. Left pedal is volume. Right pedal is Wah.	UnO	Ed Dixon
Uno Stompbox All Off.syx	Uno Stompbox mode for controlling G Major. Presets 1-95 selectable with bottom row. Stompboxes are listed below Left to Right (6-0) with CC numbers that you need to assign to those effects in the G Major for it to work. FLT/MOD 84 CH/FLG 86 DLY 82 REV 83 GATE 87 All Stompboxes set to NC at present. Also Tap T will work on each Bottom row patch if you assign TT on your G Major to CC No 80. My first attempt at this so any errors please let me know!	UnO	Ian (ianbucketbot on forum)

FLT/MOD 84